Product Description
Worm Gear Sets Motor Wheel Diameter Shafts Pin Nylon Bore Tooth Brass Stainless Steel for Speed Motor Reductions Transmission Parts Aluminum Bore Tooth Gear Set
The mating worm gear mounts on a specialized Steel 1/4″ D-Bore Barrel Hub for Worm Gear to create a reliable junction between the gear and the shaft it’s turning. The worm and the worm gear are designed so that you can run them 0.75″ apart from 1 another; the same spacing you’ll find on Ever-power and other components within the build system. Aside from the massive reduction in speed and the increase in torque, these worm gears will lock in place when at rest so you don’t have to worry about an outside force backdriving the mechanism driving them.
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Cast Steel |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-10-25
Tg38 made in China – replacement parts – in Kermanshah Iran 12V 1n. M DC Micro Gear Reducer Motor with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
A. Specification of TG38 12V 1N.m DC Micro Equipment Reducer Motor:
one. Voltage: 12V
two. Speed: 3-1160RPM
three. Torque: .3-10Kgf.cm
4. Output Electricity: 0.1-5W
five. Gearbox Ratio: 1:6 to 1: 2430
six. Gearbox Diameter: 37mm
seven. Gearbox Duration: 22.5-29mm
8. Motor Duration: 29.1mm
nine. Shaft Diameter: 6mm
ten. Shaft Length: Customized
eleven. Typical Software: Car Shutter, Funds Detector, Binding Device, Computerized Tv Rack, Packing Lender Observe Equipment, Phase Lights, Tissue Equipment, Workplace Equipment, Family Appliances, Automatic Actuator and other individuals
Notice: The information sheet is only for reference, We can make the motor according to your necessity following Analysis
B. Company Capacity
HangZhou Leison Motor Co. Ltd is a company and exporter of numerous of motors with above ten a long time knowledge.
Our merchandise ranges incorporate:
1) DC Brush motor: 6-130mm diameter, .01-1000W output power
two) DC Spur Gear Motor: 12-110mm diameter, .1-300W output electricity
3) DC Planeary Equipment Motor: 10-82mm diameter, .1-100W output power
four) Brushless DC Motor: 28-110mm, 5-1500W output power
5) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and direct screw
6) Servo Motor: 42mm to 130mm diameter, fifty-4000w
seven) AC Gear Motor: 49 to 100mm diameter, 6-a hundred and forty output power
1. Manufacturing Line:
two. Tests Products:
three. Certificates:
4. Consumer Visits:
6. FAQ:
Q: What is your principal products?
A:We at the moment create Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can examine the technical specs for earlier mentioned motors on our internet site and you can e-mail us to suggest essential motors for each your specification way too.
Q:How to decide on a suitable motor?
A:If you have motor photos or drawings to demonstrate us, or you have comprehensive specs like voltage, speed, torque, motor dimension, working mode of the motor, required life time and noise level and so forth, you should do not hesitate to permit us know, then we can recommend ideal motor per your reque EPT appropriately.
Q: Do you have custom-made services for your normal motors?
A:Sure, we can personalize for each your reque EPT for the voltage, speed, torque and shaft size/form. If you require added wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it also.
Q:Do you have individual style provider for motors?
A:Yes, we would like to design and style motors individually for our buyers, but it might require some mould cost and layout demand.
Q:Can I have samples for testing 1st?
A:Sure, definitely you can. After confirmed the required motor specs, we will quotation and supply a proforma bill for samples, when we get the payment, we will get a PASS from our account office to move forward samples appropriately.
Q:How do you make certain motor good quality?
A:We have our personal inspection processes: for incoming supplies, we have signed sample and drawing to make positive qualified incoming components for manufacturing procedure, we have tour inspection in the method and closing inspection to make confident experienced items just before shipping.
Q:What’s your lead time?
A:Typically speaking, our typical common merchandise will require 25-30days, a bit more time for customized merchandise. But we are quite flexible on the direct time, it will is dependent on the particular orders
Q:What is actually your payment time period?
A:For all our new buyers, we will require 40% deposite, sixty% paid ahead of cargo.
Q:When will you reply soon after obtained my inquiries?
A:We will reaction in 24 hrs after get your inquires.
Q:How can I tru EPT you to make sure my cash is protected?
A:We are certified by the 3rd social gathering SGS and we have exported to in excess of eighty five nations around the world up to June.2017. You can verify our popularity with our present buyers in your region (if our clients do not thoughts), or you can get by way of alibaba to get trade assurance from alibaba to make positive your cash is secure.
Q:What’s the bare minimum purchase quantity?
A:Our least order amount is dependent on various motor designs, remember to e mail us to verify. Also, we usually do not accept individual use motor orders.
Q:What is your delivery technique for motors?
A:For samples and packages considerably less than 100kg, we usually sugge EPT express shipping For heavy offers, we typically sugge EPT air delivery or sea shipping. But it all depends on our customers’ requirements.
Q:What certifications do you have?
A:We presently have CE and RO EPT certifications.
Q:Can you send me your price tag checklist?
A:Considering that we have hundreds of various goods, and price varies per different requirements, we are not ready to offer you a price checklist. But we can estimate inside 24 several hours when acquired your inquirues to make positive you can get the price in time.
Q:Can I visit your business?
A:Of course, welcome to pay a visit to our company, but you should let us know at lea EPT two weeks in advance to support us make certain no EPT meetings in the course of the day you go to us. Thanks!
Weclome speak to with us if have any concerns about this motor or EPT items!
The use of original products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the listed alternative parts contained herein are not sponsored, accepted, or made by the OEM.
EPT near me made in China – replacement parts – in Muzaffarpur India ro NEMA 11 28mm Hybrid Stepper Gear Motor with Planetary Gearbox for 3D Printer with top quality
We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Hybrid Stepper Planetary Equipment Motor
Parameter:
HP281-1 28MM
Stepper Angel: 1.8
Drawing:
Motor Electrical Specification:
| Series Design | Action Angle ( o ) | L (mm) |
Rated Recent (A) | Section Resistance (Ω) |
Period Inductance (mH) |
Holding Torque (N.cm) |
Detent Torque (N.cm) | Guide Wire (NO.) |
Motor Fat ( g) |
| HP281-00506 | 1.eight | 28 | .6 | 4.two | two.2 | 4.5 | .three | 4 | 105 |
| HP281-00606 | one.eight | 33 | .six | five.five | 3.2 | six. | .4 | four | one hundred ten |
| HP281-00806 | 1.eight | 41 | .6 | seven. | 6. | 8. | .5 | 4 | one hundred forty |
| Other Motor Electrical Specification remember to refer to Hybrid Stepper Motor net | |||||||||
Gearbox Specification:
| Ratio | three.71 | 5.18 | fourteen | 19 | 27 | 51 | seventy one | a hundred | 139 | 189 | 264 | 369 |
| Reducer Sequence | 1 | 2 | 3 | 4 | ||||||||
| Size ( mm) |
31. | 40.one | 49. | 57.9 | ||||||||
| Allowable Torque (Kg.cm) |
12 | 20 | 32 | 40 | ||||||||
| Instantaneous Torque (Kg.cm) |
36 | 60 | 96 | 120 | ||||||||
| Effectiveness (%) |
90% | 81% | 73% | 66% | ||||||||
| Excess weight (g) |
60 | 85 | 95 | 110 | ||||||||
| We can manufacture products in accordance to customer’s requirements | ||||||||||||
About Us:
We specialized in investigating, developing and servicing electrical motors, gearbox and higher precision gears with the tiny modules.
After a long time of development, we have an impartial solution design and style and the R&D group, support staff, and skilled high quality manage staff.
What is more, we have two joint ventures. 1 is found in HangZhou, which makes hybrid stepper motor, precious linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.
An additional one particular is found in HangZhou, which creates DC equipment motor. The manufacturing unit has dozens of CNC equipment and higher precision take a look at gear, implements the process management and automatic operation in most producing process.
We also have two cooperation factories. 1 is producing AC reversible synchronous motor and AC servo motor, the other a single is generating linear long term stepper motor, everlasting stepper motors.
Customer’s Check out:
The use of authentic gear manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the detailed replacement areas contained herein are not sponsored, authorized, or created by the OEM.
RV factory made in China replacement parts in Bobo Dioulasso Burkina Faso Series Worm Gear Reducer with Motor with top quality
We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
RV sequence Worm Gearbox
1. Product Attributes
Successful and risk-free working.
Compact structure and modest volume help save mounting place.
Higher load capability and overload features give steady transmission with diminished vibration and reduced sounds.
Small hole construction of gearbox tends to make this reducer routine maintenance cost-free and helps prevent lubricant from leaking.
Numerous lin ept buildings for electrical power enter and torque output allows for various mounting methods.
Minimal noise and stably managing, to adapt long expression work problem in horrible atmosphere.
Mild fat and large mechanical energy.
Motor mounting, shaft mounting and flange mounting.
two. RV series are broadly used, it is an perfect choice for contemporary industrial products to understand transmission and control at huge speed decreasing ratio.
| Input Power | 0.06-7.5kW |
| Ratio | 5-100 |
| Output Torque | 0.06-1179N. m |
Application:
Ceramic Sector
Glass Market
Meals Sector
Metallurgy Business
Beer& Consume Market
Printing and dyeing Market
Textile Industry
Warehouse Logoistics Market
Wood wor ept Equipment
environmental defense gear Sector
Leather Market
Pharmacy Business
4.Our Providers
4.1.We supply 12 months Warranty.
4.2. We have countless numbers of gearbox reducers. From Enter Electricity .06KW to 200KW, Ratio 1.3-289.74, Output pace -1095rpm and Output torque 1.4-62800Nm…They can meet up with your all various demands for various industries.
4.3. We provide E-catalog or Paper catalog,so you can choose the product effortlessly in accordance to your requirements
4.4.You are welcome to go to our manufacturing unit to check out our merchandise,we can assist you to ebook the resort or ticket
5.Company Details
Company Profile
ZheJiang ept Drive Co.,Ltd,the predecessor was a state-owned military mould company, was set up in 1965. ept specializes in the complete power transmission remedy for higher-finish products manufacturing industries dependent on the intention of “System Item, Application Design and style and Specialist Provider”.
ept have a strong technical drive with above 350 workers at existing, which includes in excess of thirty engineering professionals, 30 quality inspectors, covering an location of 80000 sq. meters and sorts of advanced processing equipment and screening equipments. We have a good foundation for the ept application growth and services of substantial-stop speed reducers & variators possessing to the provincial engineering technologies study heart,the lab of gear pace reducers, and the base of modern day R&D.
Our primary goods are R/S/K/F series helical geared motor, SNP collection planetary gearboxes, SNKG collection bevel-helical gearmotor, NCJ series equipment motor, RV collection worm gearboxes, JWB-X sequence velocity variators, B/JXJ sequence cycloidal gearboxes, XGK collection helical-hypoid Gearboxes, which commonly employed in ceramic market, glass sector, woodwor ept machinery , high voltage change, foodstuff & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and ept technically provide the expert product & service for the medium and large-conclude buyers, and our gearboxes are ideal-promoting in domestic, and even in abroad , such as in Europe, North The us, South The us, Middle East, South Asia, Southeast Asia, Africa…etc.
In the foreseeable future , ept will hold the creed of “serving client, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the notion of “good quality generates value” to focus on the customers’ requirements and provide them the aggressive transmission remedy and develop benefit for them constantly, and make a high-conclude gear producing ept and create a preferred model of changing import merchandise and upgrading constantly for the end customers.
Among Dynamic and Static, Basic is Extraordinary, let us go ept hand in hand and make a brilliant foreseeable future!
Our factory
1. 300 sets sophisticated processing equipment
two. “6S”Standardized Management
Our Team
Technological Team
Income Team
Exibition Demonstrate
2019 ASIA ceramics exhibition
2018 Globe of ept Exhibition
Quality Assurance
Goods one hundred% check before shipping
Passed ISO 9001: 2015 Certificate.
Our provider
1. We give 12 months Warranty.
two. We have hundreds of gearbox reducers. From Enter Electrical power .06KW to 200KW, Ratio 1.3-289.seventy four, Output speed -1095rpm and Output torque 1.4-62800Nm. They can fulfill your all diverse demands for diverse industries.
3. 24 several hours on the web services.
four. Rapidly delivry.
five. We supply E-catalog or Paper catalog,so you can pick the model very easily according to your requirements
6. Welcome you come to our manufacturing facility to verify our merchandise, we can support you to guide the lodge or ticket.
FAQ
Q:Are you a trading company or manufacturer?
A: We are company.
Q:The place do you foundation?
A: We are in Xihu (West Lake) Dis. district, HangZhou, China.
Q:What kinds of gearbox can you create for us?
A: R/S/K/F series helical geared motor, SNP sequence planetary gearboxes, SNKG sequence bevel-helical gearmotor, NCJ sequence gear motor, RV sequence worm gearboxes, JWB-X sequence velocity variators, B/JXJ sequence cycloidal gearboxes, XGK series helical-hypoid Gearboxes
Q:What are the application of the gearbox?
A:Goods are extensively used in ceramic, glass, meals, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wooden-wor ept machine, environmental security gear, printing and packaging, pharmacy, and leather-based. Products are marketed in some international locations and regions, this sort of as Europe, The united states, and Southeast Asia, and it possesses dozens of distributors and after-sale service agents.
Q:What is the materials you use?
A1: Aluminum Housing physique ( For the RV collection worm gearbox Size thirty~ninety)
A2: Solid iron(For the RV series worm gearbox, Measurement a hundred and ten-one hundred fifty, For the NCJ & F/R/S/K series helical equipment reducer)
Any inquiry pls make contact with:
Nicola Huang (Export revenue)
Site:
The use of unique tools manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the detailed substitution elements contained herein are not sponsored, accepted, or manufactured by the OEM.
12V manufacturer made in China – replacement parts – in Kozhikode India DC Planetary Gear Motor for Push Rod with top quality
We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~thirteen 571 88828 13858117778 571 88828
12v dc planetary gear motor for drive rod
Merchandise Description:
Can be personalized
12V planetary gearbox
Rated torque: 36rpm
Rated power: 8W or Customize
| Product | Application Parameters | Rated Torque of Gear Box | Instant Torque of Gear Box | Gear Ratio | Gear Box Length L1 |
|||||||
| Rated | At No Load | At Rated Load | Overall Length L |
|||||||||
| Voltage | Velocity | Existing | Speed | Existing | Torque | |||||||
| VDC | rpm | mA | rpm | mA | gf.cm | mN.m | mm | gf.cm | gf.cm | mm | ||
| ZWBMD032032-four | twelve. | 1348 | 210 | 1213 | 715 | 384 | 38 | 71.6 | 65000 | 250000 | four | 29.1 |
| ZWBMD032032-six | 12. | 899 | 210 | 808 | 715 | 576 | fifty six | 60000 | 200000 | six | ||
| ZWBMD032032-sixteen | 12. | 337 | 235 | 303 | 715 | 1229 | 121 | 81.6 | 65000 | 250000 | 16 | 39.one |
| ZWBMD032032-24 | twelve. | 225 | 235 | 202 | 715 | 1843 | 181 | 65000 | 250000 | 24 | ||
| ZWBMD032032-33 | 12. | 163 | 235 | 147 | 715 | 2534 | 249 | 60000 | 200000 | 33 | ||
| ZWBMD032032-67 | 12. | 80 | 270 | seventy two | 715 | 3392 | 333 | 91.six | 65000 | 250000 | sixty seven | 49.one |
| ZWBMD032032-94 | twelve. | 57 | 270 | 52 | 715 | 4759 | 467 | 65000 | 250000 | ninety four | ||
| ZWBMD032032-133 | 12. | forty one | 270 | 36 | 715 | 6733 | 660 | 65000 | 250000 | 133 | ||
| ZWBMD032032-188 | 12. | 29 | 270 | 26 | 715 | 9518 | 933 | 60000 | 200000 | 188 | ||
| ZWBMD032032-272 | 12. | 20 | 300 | 18 | 720 | 10328 | 1013 | 101.six | 80000 | 300000 | 272 | 59.1 |
| ZWBMD032032-383 | 12. | fourteen | three hundred | 13 | 720 | 14542 | 1426 | 80000 | 300000 | 383 | ||
| ZWBMD032032-540 | 12. | ten | three hundred | nine | 720 | 20503 | 2011 | 80000 | 300000 | 540 | ||
| ZWBMD032032-763 | 12. | 7 | three hundred | 6 | 720 | 28970 | 2841 | 80000 | 300000 | 763 | ||
| ZWBMD032032-1076 | twelve. | five | 300 | five | 720 | 4 571 | 4007 | 70000 | 250000 | 1076 | ||
over specifications just for reference and customizable in accordance to specifications.
2d Drawing:
Solution specifics present:
Software
|
Audio and visible equipments |
notebook Pc, camcorder, car DVD, kinescope DVD, vehicle CD player, digital camera, digital digicam, headphone stereo, cassette tape recorder and and so on. |
|
Household software |
electrical shaver, tooth brush, kitchen appliances, hair clipper, stitching machines, massager, vibrator, hair dryer, rubdown device, corn popper, scissor hair machine, vacuum cleaner, backyard garden resource, sanitary ware, window curtain, espresso machine, whisk and etc. |
|
Business office automation equipments |
CD-ROM, OA equipments, scanners, printers, multifunction machines duplicate devices, fax, FAX 13 0571 88828 paper cutter, pc peripheral, lender machine and and many others. |
|
Automotive items |
conditioning damper actuator, doorway lock actuator, retractable rearview mirror, meters, optic axis handle gadget, head mild beam amount adjuster, car h2o pump, automobile antenna, lumbar help, automated vending machine and etc. |
|
Toys and types |
radio handle product, automatic cruise manage, experience-on toy and etc. |
|
Health care software |
blood pressure meter, breath machine and etc. |
|
Industrials |
air freshener, exhibit, movement manage valves and and many others. |
|
Electric electricity tools |
electrical drill, screwdriver and etc. |
|
Precision devices |
keep an eye on, optics instruments and etc. |
Our Providers:
- ODM & OEM
- Gearbox design and improvement
- Connected engineering help
Packaging & Shipping
1) Packing Specifics
packed in nylon to start with, then carton, and then reinforced with wood circumstance for outer packing.
Or in accordance to client’s prerequisite.
2) Shipping Particulars
samples will be shipped inside of ten times
batch order leading time in accordance to the genuine scenario.
Company Information:
HangZhou ZHAOWEI Machinery & Electronics Co., Ltd was established in 2001,We supply the complete drive resolution for clients from style, tooling fabrication, factors production and assembly.
one) Competitive Rewards
- one) Competitive Benefits
seventeen+calendar year experience in producing motor gearbox
We offer complex assistance from r&d, prototype, tests, assembly and serial manufacturing , ODM &OEM
Aggressive Price tag
Solution Efficiency: Low sound, High effectiveness, Long lifespan
Prompt Supply: fifteen functioning days following payment
Little Orders Accepted
2) Primary Goods
-
Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: .01-40W,output speed:5-2000rpm and output torque:1. gf.cm -50kgf.cm,
- Custom-made worm and equipment transmission machinery
- Exact electromechanical movement module
- Precise element and assembly of plastic and metal powder injection.
Certifications
We Have handed to keep ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).
and far more…
FAQ
one. Can you make the gearbox with customized requirements?
Indeed. We have layout and advancement team, also a wonderful expression of engineers, every single of them have
several operate a long time encounter.
two.Do you give the samples?
Yes. Our company can offer the samples to you, and the shipping time is about 5-15days in accordance to the specification of gearbox you need.
three.What is your MOQ?
Our MOQ is 2000pcs. But at the commencing of our enterprise, we acknowledge modest get.
four. Do you have the merchandise in inventory?
I am sorry we donot have the merchandise in stock, All merchandise are manufactured with orders.
five. Do you provide engineering assist?
Indeed. Our company have design and style and development staff, we can give technology assist if you
want.
6.How to ship to us?
We will ship the items to you according to the DHL or UPS or FEDEX and so on account you give.
seven.How to pay the funds?
We settle for T/T in progress. Also we have diverse lender account for getting funds, like US dollors or RMB etc.
8. How can I know the item is suitable for me?
Frist, you want to offer us the a lot more information details about the item. We will suggest the merchandise to you in accordance to your prerequisite of specification. Soon after you verify, we will put together the samples to you. also we will offer you some excellent improvements in accordance to your item use.
9. Can I occur to your organization to visit?
Of course, you can appear to our firm to visit at at any time, and welcome to go to our company.
10. How do make contact with us ?
Please send an inquiry
The use of unique products manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the shown alternative components contained herein are not sponsored, accredited, or produced by the OEM.