Product Description
Worm Gear Sets Motor Wheel Diameter Shafts Pin Nylon Bore Tooth Brass Stainless Steel for Speed Motor Reductions Transmission Parts Aluminum Bore Tooth Gear Set
The mating worm gear mounts on a specialized Steel 1/4″ D-Bore Barrel Hub for Worm Gear to create a reliable junction between the gear and the shaft it’s turning. The worm and the worm gear are designed so that you can run them 0.75″ apart from 1 another; the same spacing you’ll find on Ever-power and other components within the build system. Aside from the massive reduction in speed and the increase in torque, these worm gears will lock in place when at rest so you don’t have to worry about an outside force backdriving the mechanism driving them.
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Cast Steel |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-10-25
China OEM ODM customized bronze bush bushing bucha bujes bronze bearing bushings for pump motor drill bushing
Applicable Industries: Producing Plant, Equipment Fix Stores, Farms, CZPT 6700 2rs 6700zz S6700 S6700zz open up ball bearing Retail, Building functions
Model Quantity: graphite bushing
Type: sleeve
Material: carbon graphite, Impregnated Carbon Graphite
Application: Pump
Dimension: Customerized
Packaging Particulars: Wooden containers, PTO Vast Angle Coupling suit Gwaza Shaft, wide angle joint wood instances or clients’ specifications.
Port: ZheJiang Port HangZhou Port
Firm Profile Particulars Images
| Brand name | Hengqiang (HQ) | ||||||||
| Measurement | Customized | ||||||||
| Material | Resin/Babbitt Metallic/Antimony Impregnated Carbon Graphite | ||||||||
| Application | Industrial Machinery | ||||||||
| Density | one.70~1.90g/cm³ 96N.m everlasting magnet synchronous motor | ||||||||
| Bending Energy | twenty-fifty eight Mpa | ||||||||
| Compressive Power | 38-106 Mpa | ||||||||
| Ash | ≤0.2% | ||||||||
| Sample | Obtainable | ||||||||
| Certification | ISO 9001 | ||||||||
with Hot selling 
editor by czh 2023-07-03
China Motor Pulley Price Large Diameter V Belt Pulley Factory Supply Hot Sale V Groove Pulley Ma40-Ma48 bushing and control arm
Merchandise Description
HangZhou Bethel Shaft Collar Producing Co.,Ltd.
HangZhou Bethel Shaft Collar Manufacturing Co.,Ltd. was proven in 1998. Right after a number of several years growth,it has been enlarging and enhancing alone. It is an
IS09002 certifed Business, specialized in manufacturing a variety of specifcations of sheaves. Zinc -plated Shaft Collars, Solitary and Double Split Collars, Stainless Steel
Shaft Collars, S-design Break up Collars, XTH, XTB, QD, BM Design Break up Taper Bushings, Ductile iron shaft ollars and all varieties of Weld-on Hubs, Taper-locked Bushings etc. Our
once-a-year potential is more than ten,000,000 PCS.
Aimed at To put up good quality to the initial position and To set credit worthiness above almost everything else, with effective and sillful technical drive, superior generation
equipment, excellent managing Method make the quality secure, The merchandise are well gained by the consumers, enjoying a very higher reputation in U.S.A and European
markets.
Bethel warmly welcoming guests from both overseas and home, appreciates your esteem suggestions and taking part in an energetic part in marketing of international trade trade.
china skilled factory higher precision solid iron V-belt AK sequence light-weight duty bored to dimensions pulleys
|
1.Our V-Belt Pulley Consists of |
Light Duty Bored to dimension Pulleys (AK,BK,2AK,2BK,3BK sequence) |
|
|
Light-weight Obligation Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H collection) |
|
|
Split taper bushed Pulleys (1TB,2TB,3TB series) |
|
|
Hefty Responsibility QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C collection and so on) |
|
|
Mild Duty Variable Velocity Pulleys (1VP,2VP,1VL,1VM sequence) |
|
|
QD taper bore sheaves Pulleys (3V,5V,8V series) |
|
|
Single Groove Pulleys (Okay,OL,AL collection) |
|
|
In accordance to customers’ specifications or drawings |
|
two.Resources |
Solid iron, steel, aluminium alloy, ect. |
|
three.Floor treatment |
powder coating, zinc plating, black oxided,etc |
|
4.Normal |
ANSI.API.BS.DIN.JIS.GB.and many others. |
|
five.Equipment products |
CNC middle, CNC milling device,CNC turning equipment, CNC drilling |
|
device, CNC lathes, lathe, 4 axis machine and many others. |
|
|
six.Software discipline |
Gear add-ons, Airplane, Ship, Bicycle, Motorcycle, Vehicle, Health care,Chemical, Wheel, Sports activities, Anchor, Weapon, and many others. |
|
seven.Certification |
ISO9001:2015 |
|
eight.Guarantee |
1 12 months following shippment |
|
nine. QC |
one. Materials are to be checked very carefully just before creation. |
|
|
2.Strict processing high quality manage |
|
|
three.100% inspection just before shipment. |
|
10.Inspection Gear |
CMM, Projection, Calipers, Micro caliper, Thread Micro caliperAutomatic Two / Three Coordinate Measuring Instrument etcThird party inspection avaliable CZPT customer’s needs |
|
eleven.Shippment |
TNT, FEDEX, DHL, UPS, EMS, by air, by sea |
Warehouse & Workshop
Screening Instrument
Our tests instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Completely Automated Two Coordinate Measuring Instrument ,Element Measuring Instrument,and many others.
Business Tradition
We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,
weld-on hub,any question pls feel free to contact with us, look forward to work with you!
| To Be Negotiated | 100 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Ak |
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Coating |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
|---|
###
|
1.Our V-Belt Pulley Includes
|
Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)
|
|
|
Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)
|
|
|
Split taper bushed Pulleys (1TB,2TB,3TB series)
|
|
|
Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)
|
|
|
Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)
|
|
|
QD taper bore sheaves Pulleys (3V,5V,8V series)
|
|
|
Single Groove Pulleys (OK,OL,AL series)
|
|
|
According to customers’ requirements or drawings
|
|
2.Materials
|
Cast iron, steel, aluminium alloy, ect.
|
|
3.Surface treatment
|
powder coating, zinc plating, black oxided,etc
|
|
4.Standard
|
ANSI.API.BS.DIN.JIS.GB.etc.
|
|
5.Machine equipment
|
CNC center, CNC milling machine,CNC turning machine, CNC drilling
|
|
machine, CNC lathes, lathe, 4 axis machine etc.
|
|
|
6.Application field
|
Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.
|
|
7.Certification
|
ISO9001:2015
|
|
8.Warranty
|
One year after shippment
|
|
9. QC
|
1. Materials are to be checked carefully before production.
|
|
|
2.Strict processing quality control
|
|
|
3.100% inspection before shipment.
|
|
10.Inspection Equipment
|
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable upon customer’s requirements
|
|
11.Shippment
|
TNT, FEDEX, DHL, UPS, EMS, by air, by sea
|
| To Be Negotiated | 100 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Ak |
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Coating |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
|---|
###
|
1.Our V-Belt Pulley Includes
|
Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)
|
|
|
Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)
|
|
|
Split taper bushed Pulleys (1TB,2TB,3TB series)
|
|
|
Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)
|
|
|
Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)
|
|
|
QD taper bore sheaves Pulleys (3V,5V,8V series)
|
|
|
Single Groove Pulleys (OK,OL,AL series)
|
|
|
According to customers’ requirements or drawings
|
|
2.Materials
|
Cast iron, steel, aluminium alloy, ect.
|
|
3.Surface treatment
|
powder coating, zinc plating, black oxided,etc
|
|
4.Standard
|
ANSI.API.BS.DIN.JIS.GB.etc.
|
|
5.Machine equipment
|
CNC center, CNC milling machine,CNC turning machine, CNC drilling
|
|
machine, CNC lathes, lathe, 4 axis machine etc.
|
|
|
6.Application field
|
Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.
|
|
7.Certification
|
ISO9001:2015
|
|
8.Warranty
|
One year after shippment
|
|
9. QC
|
1. Materials are to be checked carefully before production.
|
|
|
2.Strict processing quality control
|
|
|
3.100% inspection before shipment.
|
|
10.Inspection Equipment
|
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable upon customer’s requirements
|
|
11.Shippment
|
TNT, FEDEX, DHL, UPS, EMS, by air, by sea
|
bonding bushing
editor by CX 2023-04-03
China MA Bushing+Sleeve Kit Engine Motor Mount For Civic Integra EG EK EGRH EKRH 65A 75mm bushing control arm
Model: INTEGRA, Civic
Calendar year: 1996-2001, 1994-1997, 1996-2000, 1995-1996, 1992-1995
OE NO.: N/A
Automobile Fitment: ACURA, HONDA
Warranty: 6 thirty day period
Sort: Press
Car Design: -Civic-Integra
merchandise Identify: motor mount bushing
Materials: Polyurethane and Aluminum
Software: -Civic and -Acura
Top quality: high qlityua
Technics: CNC Equipment
dimensions: Regular
Coloration: black
MOQ: 50set
Packaging Information: regular or customized
Port: ZheJiang
Bushing+Sleeve of Motor/Motor Mount For Civic Integra EG EK EGRH EKRHSoftware:For 2Bolts/3Bolts Civic Integra EG EK EGRH EKRHDeal Includes:1Kit(Identical as the picture showing)a single Set(2pcs Bushing+1pcs Sleeve) Specification
| * Materials of the Bushing:65A Polyurethane | ||||||||
| * Materials of the Sleeve:Aluminum | ||||||||
| Bushing’OD:60mm | ||||||||
| Bushing’ID:21mm | ||||||||
| Sleeve’OD :22mm | ||||||||
| Sleeve’ China Bearing Manufacturing facility Imperial System taper roller bearing HM51844510 HM22014910 ID:12mm | ||||||||
| Sleeve’Length:75mm | ||||||||
| 100% Brand name New and Best High quality | ||||||||
bushing replacement
editor by czh 2023-03-18
China Customized CNC Turning Metal Machining Stainless Steel Motor Shaft Sleeve Bushing for Pump bushing adapter
Applicable Industries: Machinery Restore Stores
Product Number: motor shaft bushing
Sort: sleeve
Substance: stainless metal, Aluminum,Stainless Metal,Brass,and many others
Product name: CNC Machining Stainless Steel Motor Shaft Sleeve Bushing for Pump
Key word: motor shaft bushing
Approach: CNC Machining, large top quality PTO shaft CNC Turning
Surface area therapy: GOLD PLATING,ANODIZE,POWDER COATING, BLASTING
Drawing Structure: PDF/DWG/IGS/STP/JPG, and so forth
Tolerance: +/-. Auto Areas Suspension Reduce Control Arm Bushing FOR CHEVROLET CAPTIVA 2007-2015 3rd Get together inspection available
Bulk Direct time: 10 -twenty times
Packaging Particulars: First of all Tiny Plastic Baggage For Inside Packing,Next Normal Cartons For Exterior,Finally Pallet Packing For Shipping or According To Customers’ Demands.
Port: ShenZhen/HongKong
Customized CNC Turning Metal Machining Stainless Metal Motor Shaft Sleeve Bushing for Pump- These parts are custom made produced only, not in inventory Substantial velocity Needle Roller Bearing for purifier with lower sounds NA6912
– We can create based on your drawings or samples.
– We can indicator NDA(Non-disclosure Settlement) with you if you need to have
– Capability:50000 Monthly
Items Display A lot more Goods Packing & PTO Drive Shaft for Agriculture Use in John Deere Shipping Each part have its standaed Packing instruction,every single parts packed in security way, we could do pallet if needed.
We could layout the Packing per customer demands
brass bushing
editor by czh 2023-02-21
China Motor Pulley Price Large Diameter V Belt Pulley Factory Supply Hot Sale V Groove Pulley MB40-MB48 brass bushing
Product Description
china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys
|
1.;Our V-Belt Pulley Includes |
Light Duty Bored to size Pulleys (AK,;BK,;2AK,;2BK,;3BK series); |
|
|
Light Duty Taper Bore Pulleys (AK-H,;BK-H,;2AK-H,;2BK-H series); |
|
|
Split taper bushed Pulleys (1TB,;2TB,;3TB series); |
|
|
Heavy Duty QD Pulleys (1B,;2B,;3B,;1C,;2C,;3C,;4C,;5C series etc); |
|
|
Light Duty Variable Speed Pulleys (1VP,;2VP,;1VL,;1VM series); |
|
|
QD taper bore sheaves Pulleys (3V,;5V,;8V series); |
|
|
Single Groove Pulleys (OK,;OL,;AL series); |
|
|
According to customers’ requirements or drawings |
|
2.;Materials |
Cast iron,; steel,; aluminium alloy,; ect.; |
|
3.;Surface treatment |
powder coating,; zinc plating,; black oxided,;etc |
|
4.;Standard |
ANSI.;API.;BS.;DIN.;JIS.;GB.;etc.; |
|
5.;Machine equipment |
CNC center,; CNC milling machine,;CNC turning machine,; CNC drilling |
|
machine,; CNC lathes,; lathe,; 4 axis machine etc.; |
|
|
6.;Application field |
Equipment accessories,; Airplane,; Ship,; Bicycle,; Motorcycle,; Auto,; Medical,;Chemical,; Wheel,; Sports,; Anchor,; Weapon,; etc.; |
|
7.;Certification |
ISO9001:;2015 |
|
8.;Warranty |
One year after shippment |
|
9.; QC |
1.; Materials are to be checked carefully before production.; |
|
|
2.;Strict processing quality control |
|
|
3.;100% inspection before shipment.; |
|
10.;Inspection Equipment |
CMM,; Projection,; Calipers,; Micro caliper,; Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable upon customer’s requirements |
|
11.;Shippment |
TNT,; FEDEX,; DHL,; UPS,; EMS,; by air,; by sea |
|
AK Series Sheave |
AK17 to AK184 |
|||
|
|
2AK20 to 2AK184 |
|||
|
1);Widely used in the European & America market with good hardness and strength |
||||
|
2);AK /2AK SHEAVES,; For “4L” or “A” Belts and “3L” BELTS |
||||
|
3);Material:; Cast iron,;Steel,;aluminum alloy,;etc |
||||
|
4);Finish:; Gray Powder Paint,; |
||||
Warehouse & Workshop
Company Certificate
Our testing instrument includes Fully Automatic Three Coordinate Measuring Instrument ,;Fully Automatic Two Coordinate Measuring Instrument ,;Element Measuring Instrument,;etc.;
Company Information
HangZhou Bethel Shaft Collar Manufacturing Co.;,; Ltd is an ISO9001:;2008 certified enterprise,;specialized in manufacturing various specifications of Sheaves,;Zinc-Plated Shaft Collars,;Single and Double Split Collars,;Stainless Steel Shaft Collars,;
S-Style Split Collars,;XTH,;XTB,;QD,;BM Style Split Taper Bushings,;and all kinds of Weld on Hubs,;Taper Locked Bushings and various Couplings etc.;Our annual capacity is over 10,;000,;000 pcs.;
Production Flow
Company Culture
We are professional manufacturer focus in shaft collars,;split shaft collars,;bushings,;sheaves,;pulleys,;couplings,;
weld-on hubs,;any question pls feel free to contact with us,;
look forward to work with.;
| To Be Negotiated | 100 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Ak |
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Coating |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
Available
|
|---|
###
|
1.Our V-Belt Pulley Includes
|
Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)
|
|
|
Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)
|
|
|
Split taper bushed Pulleys (1TB,2TB,3TB series)
|
|
|
Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)
|
|
|
Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)
|
|
|
QD taper bore sheaves Pulleys (3V,5V,8V series)
|
|
|
Single Groove Pulleys (OK,OL,AL series)
|
|
|
According to customers' requirements or drawings
|
|
2.Materials
|
Cast iron, steel, aluminium alloy, ect.
|
|
3.Surface treatment
|
powder coating, zinc plating, black oxided,etc
|
|
4.Standard
|
ANSI.API.BS.DIN.JIS.GB.etc.
|
|
5.Machine equipment
|
CNC center, CNC milling machine,CNC turning machine, CNC drilling
|
|
machine, CNC lathes, lathe, 4 axis machine etc.
|
|
|
6.Application field
|
Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.
|
|
7.Certification
|
ISO9001:2015
|
|
8.Warranty
|
One year after shippment
|
|
9. QC
|
1. Materials are to be checked carefully before production.
|
|
|
2.Strict processing quality control
|
|
|
3.100% inspection before shipment.
|
|
10.Inspection Equipment
|
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable upon customer's requirements
|
|
11.Shippment
|
TNT, FEDEX, DHL, UPS, EMS, by air, by sea
|
###
|
AK Series Sheave
|
AK17 to AK184
|
|||
|
|
2AK20 to 2AK184
|
|||
|
1)Widely used in the European & America market with good hardness and strength
|
||||
|
2)AK /2AK SHEAVES, For "4L" or "A" Belts and "3L" BELTS
|
||||
|
3)Material: Cast iron,Steel,aluminum alloy,etc
|
||||
|
4)Finish: Gray Powder Paint,
|
||||
| To Be Negotiated | 100 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Ak |
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Coating |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
Available
|
|---|
###
|
1.Our V-Belt Pulley Includes
|
Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)
|
|
|
Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)
|
|
|
Split taper bushed Pulleys (1TB,2TB,3TB series)
|
|
|
Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)
|
|
|
Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)
|
|
|
QD taper bore sheaves Pulleys (3V,5V,8V series)
|
|
|
Single Groove Pulleys (OK,OL,AL series)
|
|
|
According to customers' requirements or drawings
|
|
2.Materials
|
Cast iron, steel, aluminium alloy, ect.
|
|
3.Surface treatment
|
powder coating, zinc plating, black oxided,etc
|
|
4.Standard
|
ANSI.API.BS.DIN.JIS.GB.etc.
|
|
5.Machine equipment
|
CNC center, CNC milling machine,CNC turning machine, CNC drilling
|
|
machine, CNC lathes, lathe, 4 axis machine etc.
|
|
|
6.Application field
|
Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.
|
|
7.Certification
|
ISO9001:2015
|
|
8.Warranty
|
One year after shippment
|
|
9. QC
|
1. Materials are to be checked carefully before production.
|
|
|
2.Strict processing quality control
|
|
|
3.100% inspection before shipment.
|
|
10.Inspection Equipment
|
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable upon customer's requirements
|
|
11.Shippment
|
TNT, FEDEX, DHL, UPS, EMS, by air, by sea
|
###
|
AK Series Sheave
|
AK17 to AK184
|
|||
|
|
2AK20 to 2AK184
|
|||
|
1)Widely used in the European & America market with good hardness and strength
|
||||
|
2)AK /2AK SHEAVES, For "4L" or "A" Belts and "3L" BELTS
|
||||
|
3)Material: Cast iron,Steel,aluminum alloy,etc
|
||||
|
4)Finish: Gray Powder Paint,
|
||||
wholesaler
editor by czh 2022-12-07
China Heavy Duty Poly V Sheave Multi-Ribbed Compound Belt Wheel Cast Iron Drive Grooved Tension Bushing Pulley for Electric Motor bushing press
Product Description
Heavy Duty Poly V Sheave Multi-ribbed Compound Belt Wheel Cast iron Drive Grooved Tension bushing Pulley For Electric Motor
V- belt pulley
V- belt pulley of different types ( according to type and width of belts). The material used is cast iron EN-GJL-250 UNI EN 1561, and for only a few types it is steel C45 E UNI EN 10083-1. They have a small prebore that can be machined according to customers’ requirements. Moreover the most common types are available also with taperlock bore.
European standards :
a) V-belt pulley for taper bushing: SPZ, SPA, SPB, SPC, up to 10 grooves
b) Adjustable speed V-belt pulleys and variable speed pulleys
c) Flat belt pulleys and conveyor belt pulleys
· American standard:
a) Sheaves for taper bushing: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushing: 3V, 5V, 8V
d) Sheaves for 3L, 4L or A, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK
e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
· Bore: pilot bore, finish bore, taper bore, bore for QD bushing
– Parts can be made according to drawings and/or samples
· we can offer the rang size diameter 62MM~2000MM
Company Profile
Related product:
| To Be Negotiated | 10 Pieces (Min. Order) |
###
| Certification: | CE, ISO |
|---|---|
| Pulley Sizes: | 3V 5V 8V SPA Spb Spc Spz |
| Manufacturing Process: | Casting |
| Material: | Iron |
| Surface Treatment: | Baking Paint |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
| To Be Negotiated | 10 Pieces (Min. Order) |
###
| Certification: | CE, ISO |
|---|---|
| Pulley Sizes: | 3V 5V 8V SPA Spb Spc Spz |
| Manufacturing Process: | Casting |
| Material: | Iron |
| Surface Treatment: | Baking Paint |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
bronze bushing
editor by czh 2022-11-30
Tg38 made in China – replacement parts – in Kermanshah Iran 12V 1n. M DC Micro Gear Reducer Motor with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
A. Specification of TG38 12V 1N.m DC Micro Equipment Reducer Motor:
one. Voltage: 12V
two. Speed: 3-1160RPM
three. Torque: .3-10Kgf.cm
4. Output Electricity: 0.1-5W
five. Gearbox Ratio: 1:6 to 1: 2430
six. Gearbox Diameter: 37mm
seven. Gearbox Duration: 22.5-29mm
8. Motor Duration: 29.1mm
nine. Shaft Diameter: 6mm
ten. Shaft Length: Customized
eleven. Typical Software: Car Shutter, Funds Detector, Binding Device, Computerized Tv Rack, Packing Lender Observe Equipment, Phase Lights, Tissue Equipment, Workplace Equipment, Family Appliances, Automatic Actuator and other individuals
Notice: The information sheet is only for reference, We can make the motor according to your necessity following Analysis
B. Company Capacity
HangZhou Leison Motor Co. Ltd is a company and exporter of numerous of motors with above ten a long time knowledge.
Our merchandise ranges incorporate:
1) DC Brush motor: 6-130mm diameter, .01-1000W output power
two) DC Spur Gear Motor: 12-110mm diameter, .1-300W output electricity
3) DC Planeary Equipment Motor: 10-82mm diameter, .1-100W output power
four) Brushless DC Motor: 28-110mm, 5-1500W output power
5) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and direct screw
6) Servo Motor: 42mm to 130mm diameter, fifty-4000w
seven) AC Gear Motor: 49 to 100mm diameter, 6-a hundred and forty output power
1. Manufacturing Line:
two. Tests Products:
three. Certificates:
4. Consumer Visits:
6. FAQ:
Q: What is your principal products?
A:We at the moment create Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can examine the technical specs for earlier mentioned motors on our internet site and you can e-mail us to suggest essential motors for each your specification way too.
Q:How to decide on a suitable motor?
A:If you have motor photos or drawings to demonstrate us, or you have comprehensive specs like voltage, speed, torque, motor dimension, working mode of the motor, required life time and noise level and so forth, you should do not hesitate to permit us know, then we can recommend ideal motor per your reque EPT appropriately.
Q: Do you have custom-made services for your normal motors?
A:Sure, we can personalize for each your reque EPT for the voltage, speed, torque and shaft size/form. If you require added wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it also.
Q:Do you have individual style provider for motors?
A:Yes, we would like to design and style motors individually for our buyers, but it might require some mould cost and layout demand.
Q:Can I have samples for testing 1st?
A:Sure, definitely you can. After confirmed the required motor specs, we will quotation and supply a proforma bill for samples, when we get the payment, we will get a PASS from our account office to move forward samples appropriately.
Q:How do you make certain motor good quality?
A:We have our personal inspection processes: for incoming supplies, we have signed sample and drawing to make positive qualified incoming components for manufacturing procedure, we have tour inspection in the method and closing inspection to make confident experienced items just before shipping.
Q:What’s your lead time?
A:Typically speaking, our typical common merchandise will require 25-30days, a bit more time for customized merchandise. But we are quite flexible on the direct time, it will is dependent on the particular orders
Q:What is actually your payment time period?
A:For all our new buyers, we will require 40% deposite, sixty% paid ahead of cargo.
Q:When will you reply soon after obtained my inquiries?
A:We will reaction in 24 hrs after get your inquires.
Q:How can I tru EPT you to make sure my cash is protected?
A:We are certified by the 3rd social gathering SGS and we have exported to in excess of eighty five nations around the world up to June.2017. You can verify our popularity with our present buyers in your region (if our clients do not thoughts), or you can get by way of alibaba to get trade assurance from alibaba to make positive your cash is secure.
Q:What’s the bare minimum purchase quantity?
A:Our least order amount is dependent on various motor designs, remember to e mail us to verify. Also, we usually do not accept individual use motor orders.
Q:What is your delivery technique for motors?
A:For samples and packages considerably less than 100kg, we usually sugge EPT express shipping For heavy offers, we typically sugge EPT air delivery or sea shipping. But it all depends on our customers’ requirements.
Q:What certifications do you have?
A:We presently have CE and RO EPT certifications.
Q:Can you send me your price tag checklist?
A:Considering that we have hundreds of various goods, and price varies per different requirements, we are not ready to offer you a price checklist. But we can estimate inside 24 several hours when acquired your inquirues to make positive you can get the price in time.
Q:Can I visit your business?
A:Of course, welcome to pay a visit to our company, but you should let us know at lea EPT two weeks in advance to support us make certain no EPT meetings in the course of the day you go to us. Thanks!
Weclome speak to with us if have any concerns about this motor or EPT items!
The use of original products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the listed alternative parts contained herein are not sponsored, accepted, or made by the OEM.
Plf120 made in China – replacement parts – in Juiz De Fora Brazil One Stage Speed Reducer Mitsubishi Servo Motor Parts with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 different branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
PLF120 One particular Stage Velocity Reducer Mitsubishi Servo Motor Elements
-Planetary gearbox is a widely employed industrial merchandise, which can decrease the velocity of motor and improve the output torque. Planetary reducer can be utilised as supporting components in lifting, excavation, transportation, development and EPT industries.
-Single stage :3,4,5,7,ten
-Internet Fat: 6.9 Kg
-Product image
-Conpments of the gearbox
-Datasheet
-Function
Transmission Variety: Planetary electrical power transmission sort
Material : Gear ring 42CrmoTi
Flange Aluminum casting
Output shaft 40Crmo
Output variety:PLE round falnge output
PLF square flange output
ZPLE appropriate angle spherical flange output
ZPLF correct angle sq. flange output
Backlash: Spur gearbox single phase : <7 arcmin
Spur gearbox two phase : <12 arcmin
Helical gearbox solitary phase : <3 arcmin
Helical gearbox one stage : <5 arcmin
Minimal sounds and substantial high quality.
-Firm introduction
Target is an automation & travel concentrated world-wide company, providing world-wide clients with manage, exhibit, drive and technique solutions & EPT associated items and services, under the help of its excellent electrical and digital technological innovation as effectively as sturdy handle complex pressure.
We offer and produce perfect goods and remedies according to distinct need of the sector. Our items have been utilized and used effectively in packing, printing, textiles, plastic injection, elevator, device device, robotic,wooden chopping, stone carving, ceramic, glass, paper producing industry, crane, enthusiast & pump, new energy methods etc.
Emphasis, your expert electrical partner !
-Payment & Package & Delivery
one,Payment
( T/T , Western union, Paypal , L/C and so on )
two,Pakcage
( Modest gearbox use carton package, Huge gearbox use wooden box package )
three,Delivery
( By Global Categorical, By Air , By Sea )
The use of first gear manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the outlined alternative elements contained herein are not sponsored, authorized, or manufactured by the OEM.